Thermometer Accessories
Chemglass Life Sciences Adapter, rubber fitting only
Adapter, rubber fitting only. Replacement adapter for series CG1514A flasks.
Chemglass Life Sciences PFA Coated Stainless Steel Thermocouple: 1/4" Diameter x 26" Long, Type "K", Fits Reactor Capacity: 10L-20L
PFA Coated Stainless Steel Thermocouple: 1/4" Diameter x 26" Long, Type "K", Fits Reactor Capacity: 10L-20L. Thermocouples for use with Chemglass process reactors. Available in both ¿T¿ (blue connections) and ¿K¿ (yellow connections). The detachable thermocouples are for direct insertion in the reactors using a CG-1048-A or CG-1042-E thermocouple adapter, while the 4¿ long Hastelloy C-276 style is for use with the CG-1971 baffles and adapters. Detachable type thermocouples have a standard male plug (OST) and require a coiled extension cord for connection to the CG-3498 temperature monitor. The 4¿ long Hastelloy C-276 thermocouples are supplied with a 4ft FEP insulated cord having a standard male plug (OST).PLEASE NOTE: THE 1/2¿ DIAMETER PROBES HAVE A TRANSITION TO 6¿ OF PTFE LEADS AND ARE CLEAR FEP PTFE COATED. Maximum Probe Temperature Based on Coating- FEP is 200¿C and the Black PFA is 250¿C
Hanna Pharmaceutical Supply Co., Inc. THERMOMETER PROBE COVER SURETEMP
Probe Cover for SureTemp Thermometer 250/box Each box Contains 10 Packs of 25 Probe Covers
Please note: This item is nonrefundable, non-returnable and non-cancelable once order is placed.
Cole-Parmer Digi-Sense RTD Probe, 100 Ohm, 3-ft SS Braid Cable; 9" L
RTD bendable probes are designed to measure temperature in a confined space.Maximum error for probe assembly is 1.1C + 0.12% of reading below 300F, 0.35% of reading above 300F. Alpha coefficient is 0.003850 omega/omega/C (DIN IEC 751). Resistance at ice point (0C) is 100 omega.
Cole-Parmer Digi-Sense Thermistor Probe, 304 SST, 5 / 32" Dia, 4.5" L, Phono Plug, 10ft Lead
Thermistor probes offer excellent accuracy over the biological temperature range. Probes are electronically isolated and come with a 10 ft. lead with a phono plug (unless otherwise specified). Probes are designed for multiple applications. Time Constant: 1-4 seconds or greater
Cole-Parmer Type-K, 45 Angle Surface Probe, 10" L, Mini-Connector, Exposed, 5ft Coil Cord
Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).
Cole-Parmer Digi-Sense Thermocouple Wire Type K 20-Gauge, High Temperature Glass Braid, 100ft
Wire comes in 20-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.
Cole-Parmer Digi-Sense Economical Hi-Accy RTD Probe 3 Wire 3 P" Connector, 1 / 4" Dia 20" L 1M Cable
Ideal for applications where accuracy is a factor but so is cost. Alpha coefficient is 0.003850 omega/omega/C (DIN IEC 751). Resistance at ice point (0C) is 100 omega. Time Constant: 2 seconds or greater.
Ace Glass, Inc. Adapter, #7 Ace-Thred top, 14/20 inner bottom, nylon bushing with PTFE ferrule
#7 Ace-Thred mini adapter with 14/20 inner joint bottom, and nylon bushing with PTFE ferrule. Used for probes, thermometers, bleed tubes, and electrodes. Adapter will accomm ODate items up to 6.4mm diameter. Suitable for vacuum work.
Ace Glass, Inc. Thermometer adapter, PTFE, 24/25 to compression seal, use with 6-7mm diameter tubes, Viton; O-rings
24/25 PTFE thermometer adapter with FETFE o-ring, for use with plain stem thermometers, gas inlet tubes, etc. The o-ring compression seal on the adapter allows adjustable depth positioning. Adapter accomm ODates tubes up to 7mm.
Ace Glass, Inc. Sensor probe, J thermocouple, 1/4in OD x 12in inconel sheath, 72in male mini plug lead
Sensor probe, J thermocouple, 1/4in OD x 12in inconel sheath, 72in male mini plug lead
Thermco Products Inc 30ml PETG plastic bottle w/Biosafe Liquid & Magnets
30ml bottle with insulating liquid for liquid-in-glass thermometer and/or temperature probes to monitor temperatures in freezers, refrigerators, incubators, oven and other laboratory instruments. Bottle is filled with bio-safe glycol and has dual magnets to install on doors or wall of the instrument saving space